Products & Materials

Equipment

CityLiner 12 MaxLiner Combination System

Description

  • Each CityLiner® 12 - MaxLiner® Combination System is designed to accommodate up to 12" diameter CityLiner® and up to 10" diameter MaxLiner® CIPP, and is custom made to meet your individual needs. A CityLiner® 12 - MaxLiner® Combination System consists of a CityLiner® 12 system plus the following components:.

MaxLiner® Gun set

  • Inversion machine.
  • 1 set adapter rings for 6"-8" diameters.
  • 1 control unit for compressed air control, safety valve and manometer.
  • 1 pair air hoses (6 ft).

MaxLiner® Gun accessories

  • Adapter ring for 4" diameter.
  • Adapter ring for 5" diameter.
  • Digital scale.
  • Control box HL - for maintaining air pressure in the liner during the curing process; essential for processing 2 liners at the same time.
  • 4", 6" and 8" plugs.
  • Mixing bit - 24" long, 3/8" shaft, 4" plate.

MaxLiner® HotKick water flow heater

  • Type: Combustion type, pressure vapor forced flue.
  • Heating supply system: Instantaneous.
  • Source water: Direct connection to main supply.
  • Ignition: High voltage discharge spark.
  • Fuel: ASTM D396 No. 2 fuel oil.
  • Efficiency: 88%.
  • Hot water input: 148,000 BTU/hr.
  • Fuel consumption: 1.05 gal/hr.
  • Capacity of heat exchanger: 5.10 gal.
  • Dimensions: 30"x 44"x 38".
  • Weight: 120 lbs (empty).
  • Electrical rating: 120 Volts AC, 60 Hz; ignition -120 W; burning - 98 W.
  • Safety device: Over-heat protector, ignition safety device, empty burning protective device, heat exchanger bi-metal switch, temperature fuse, fusible link valve.
  • 25 LF - Red supply hose (2 EA).
  • 25 LF - Black return hose (2 EA).
  • 50 LF - Lay flat hose (3 EA).
  • 3" / 4.5" / 5.5" new manifold (1 EA).
  • Roll of manifold insulating foam wrap (1 EA).
  • 4" clamps (3 EA).
  • 6" clamps (3 EA).
  • 250 LF of pull rope.

Upgrades and Modifications - See CityLiner 12 catalog sheet for a complete list of available options.